Side vents - Bolts

[Johoo_NL]

Lads, i am going to install the vents in the front bumper.
Unfortunally i can't remember which bolts and plate-nuts were used when i check my boxes full off small parts.

Anyone have a picture from behind the vents so i can check, or perhaps have the finish code from both?

[BartFRS]

The clips don't show up in MicroCat so they must be sold with the vents? I need to check as I do have a set of brand new vents.

Microcat shows 2 types of screws used for the front bumper.
5x15mm and 6,3x25mm
My guess is that 5x15 was used for the mesh and 6,3x25 for the vents (although it does feel like a bit too much in length).

Unfortunately I don't find any pictures taken from a bumper to back it up.

[Johoo_NL]

These are the bolts needed for the mesh. Indeed 5x15. Also plastic washers. One of the few bolts i have without the finis bag.