Antifreeze!!

[Bradomia]

Just interested to see if there's a specific type of antifreeze to use on the FRS wether there is any factors to take into consideration!! I.e colour etc
Ryan 🤙

[DanT404]

Best choice is the Ford pink stuff in my opinion mate

[Bradomia]

Best choice is the Ford pink stuff in my opinion mate

Ace mate cheers bud

[macaneli]

G12 pink o red colour.

[S1 RST]

That indeed is the correct one to use.

[Bradomia]

Where can I source this fellas?

[macaneli]

I used G12 Febi bilstein antifreeze

[Bradomia]

G12 pink o red color

Cheers mate

[S1 RST]

Bradomia Any decent parts store should be able to sell you the pink G12 antifreeze, even Halfords will have it in stock.

[jmr3i]

Use Evans coolant since 2 or 3 years with no issues 😁

[Mahoneysrs]

Ford for me

[WayneR#1195]

Evening all, just to re-open this thread, is the Ford Coolant, still the choice for people. My bottle of Ford Coolant has turned a nasty green colour, and there's no way it's entering my car..Cheers.

[DanT404]

Evening all, just to re-open this thread, is the Ford Coolant, still the choice for people. My bottle of Ford Coolant has turned a nasty green colour, and there's no way it's entering my car..Cheers.

Yes Ford Super Plus Premium i think they call it.
It was always pink in the past but i notice they have started producing it in other shades now. There is a note included in the listings to say it can be mixed with the existing pink stuff with no issue but for the work it takes, i would probably just drain it all, flush and replace with completely new. Your engine and cooling system will thank you for some nice fresh coolant .

[WayneR#1195]

Yes Ford Super Plus Premium i think they call it.
It was always pink in the past but i notice they have started producing it in other shades now. There is a note included in the listings to say it can be mixed with the existing pink stuff with no issue but for the work it takes, i would probably just drain it all, flush and replace with completely new. Your engine and cooling system will thank you for some nice fresh coolant .

My thoughts exactly Dan. Could do with a new refresh of fluids. Cheers.

[BOB87]

Hi. What is the best antifreeze to use? The manual says 50% distilled water and WSS-M97 B44-D specification, but there are a lot of antifreezes that fit this. I read that if there is “ethylene glycol” in the composition, such a ready mixture that is sold in canisters boils already at 95 degrees, where water does not boil yet and on our hot motors it is unacceptable. So still who has what experience ?